8
STATION AND 16 STATION EBB-FLO CONTROLLERS:| 8 And 16 Station EBB-FLO Controllers | Single Bench Mechanical Timer |
| Back To GROmaster Home Page | Back To Controllers Page |
8
STATION AND 16 STATION EBB-FLO CONTROLLERS:
These controllers are made specifically for use in controlling sub-irrigation systems in greenhouses. The electronic systems are manufactured to our exact specifications. The housing is weather resistant for use in harsh greenhouse environments.
A unique feature of these controllers is the ability to program a "pause" between each watering zone to allow time for the excess water from one zone to return to the holding tank before the next zone is watered.
These controllers can be started
(or stopped) manually. They can also be started one or more times per day
by the time clock on the control panel. They can also be started by an external
start signal.
These controllers can be linked together to control any number of valves, where each controller will start the next one in line after watering its own zones.
These controllers can also be run in the continuous mode. This is useful in running valves for hydroponic systems, such as cut flowers, or vegetables, where it is desired to water each zone at a regular interval.
| Back To Top Of Page |
Pricing Information |
SIMPLE MECHANICAL TIMER FOR SINGLE BENCH:
These simple mechanical spring-wound timers are ideal for controlling a single EBB-FLO bench.
The pump can be in a tank under the bench, and connected to the spring-wound timer. When it is desired to water the bench, you simply turn the dial to the desired number of minutes. The pump will be turned on and fill the bench. As soon as the pump turns off, the water will drain back into the tank.
The timer is furnished in a weather resistant bow, with clamps ready to attach to the front leg of the bench.
| Back To Top Of Page |
Pricing Information |