HEAVY DUTY WEATHERMATIC
SOLENOID VALVES
We sell a series of solenoid valves from Weathermatic. Their bodies
are made from high strength glass filled plastic, which is state of the
art for heavy duty commercial valves. The valve features a dual ported/nylon
reinforced diaphragm and reverse flow design which provide longer life and
greater debris resistance. They also have flow control knobs and manual
on/off in case of solenoid or power failure.
They are available in 1", 1-1/2", and 2" pipe
sizes.
» Technical Information
Model Specifications
12024E-10 (1 in. FIP/25mm nominal)*
12024EF-10 (1 in. FIP w/flow control)*
Operating Range
150 psi (10,0 bar) rating
Wiring requires a single lead from the controller to each solenoid,
plus a common neutral to all solenoids; type UF wire, U.L. listed,
in recommended for all hookups.
24 VAC/60 Hz 24 VAC/50 Hz
Inrush: 9.77 VA Inrush: 10.5 VA
Holding: 6.2 VA Holding: 6.88 VA